📅 29 January 2022
DOI: 10.36499/jcpmt.v1i1.5676
Mechanical Properties of Injection Molded Recycled High Density Polyethylene (rHDPE) Blends with pellets Low Density Polyethylene (pLDPE)
Journal of Chemical Process and Material Technology
Universitas Wahid Hasyim
📄 Abstract
Recycling polymer has become a mandatory for sustainable development goals, life beyond water and land. Therefore, recycled polymer blends containing rHDPE/pLDPE (high density polyethylene and low density polyethylene) with composition 100/0, 80/20, 70/30, 50/50, 40/60, 30/70, and 0/100 have been prepared by melt compounding method using injection molding at 200 oC. Tensile testing shows that there is strong combination between rHDPE/rLDPE blends. Elongation at break differ from 122-230% and density test give results around 1.1 g/cm3. Injection molding process with the proper temperature setting and mixing of crushed plastic also affects the ductility, flexibility, brittleness and hardness of the specimen
ℹ️ Informasi Publikasi
Tanggal Publikasi
29 January 2022
Volume / Nomor / Tahun
Volume 1, Nomor 1, Tahun 2022
📝 HOW TO CITE
Dzulfikar, Muhammad; Respati, Sri Mulyo Bondan; Nasikin, Muhammad, "Mechanical Properties of Injection Molded Recycled High Density Polyethylene (rHDPE) Blends with pellets Low Density Polyethylene (pLDPE)," Journal of Chemical Process and Material Technology, vol. 1, no. 1, Jan. 2022.
ACM
ACS
APA
ABNT
Chicago
Harvard
IEEE
MLA
Turabian
Vancouver
Download Citation
0
Sitasi
Cek Google Scholar