Klaim Artikel Anda
Verifikasi kepemilikan artikel akademik
Apakah artikel-artikel ini milik Anda?
Daftarkan diri Anda sebagai author untuk mengklaim artikel dan dapatkan profil akademik terverifikasi dengan fitur lengkap.
Badge Verifikasi
Profil terverifikasi resmi
Statistik Lengkap
H-index, sitasi, dan metrik
Visibilitas Tinggi
Tampil di direktori author
Kelola Publikasi
Dashboard artikel terpadu
Langkah-langkah Klaim Artikel:
- 1. Daftar akun author dengan email akademik Anda
- 2. Verifikasi email dan lengkapi profil
- 3. Login dan buka menu "Klaim Artikel"
- 4. Cari dan klaim artikel Anda
- 5. Tunggu verifikasi dari admin (1-3 hari kerja)
Menampilkan 1–4 dari 4 artikel
Effect of Different Layers on the Performance of Laminate Epoxy Composite Reinforced with Textile Waste
Thomas Junaedi
; Siregar, Januar Parlaungan
; Zalani, Mohamed Reza
; Imran, Al Ichlas
; Tezara Cionita
; Endah Murtiana Sari
; Deni Fajar Fitriyana
; Etanto Heiliano Wijayanto
Post-consumer textile waste poses significant environmental problems, but its potential for commercial recycling remains under-researched. Therefore, this study utilizes calico textile (CT) waste as reinforcement in polymer composites. The effect of layering number of CT in epoxy composite will be investigated. CT was varied with three layers, namely 1, 3, and 5 embedded in epoxy resin with the hand lay-up method in open molding. The mechanical testing of pure epoxy as a control point for tensil...
Google Scholar
DOI
Mechanical Properties of Epoxy Composite Reinforced with Spent Coffee Ground and Coffee Husk
Etanto Heiliano Wijayanto
; Imran, Al Ichlas
; Siregar, Januar Parlaungan
; Mohd Ruzaimi Mat Rejab
; Tezara Cionita
; Wisnu Prayogo
; Deni Fajar Fitriyana
; Rozanna Dewi
; Thomas Junaedi
; Agustinus Purna Irawan
Advance Sustainable Science, Engineering and Technology (ASSET)
Vol 7
, No 4
(2025)
This study aims to investigate the effect of increasing the concentration of natural filler on the mechanical properties of Spent Coffee Ground (SCG) / Coffee Husk (CH) reinforced epoxy matrix composite. The materials used in this study are epoxy resin as a matrix and waste coffee grounds and coffee husks as natural fillers with sizes of 100-mesh and concentrations of 10, 20, and 30 wt.%. The results showed that SCG 10 wt.% produced the best mechanical properties compared to the other samples ba...
Google Scholar
DOI
Mechanical Performance of Epoxy Composite Reinforced with Wood Dust and Crumb Rubber Waste
Imran, Al Ichlas
; Siregar, Januar Parlaungan
; Cionita, Tezara
; Fitriyana, Deni Fajar
; Anis, Samsudin
; Dewi, Rozanna
; Junaedi, Thomas
; Wijayanto, Etanto Heiliano
; Prayogo, Wisnu
Advance Sustainable Science, Engineering and Technology (ASSET)
Vol 7
, No 4
(2025)
The incorporation of wood dust and crumb rubber waste as filler in polymer matrix composite still requires in-depth evaluation of mechanical properties because they have different characteristics. This study evaluates the tensile, flexural, and hardness properties of epoxy composites reinforced with various fractions of wood dust and crumb rubber (5, 10, and 15%). The results showed that the composite with 5% crumb rubber produced the highest tensile strength of 15.52 MPa (CR5), while the highes...
Google Scholar
DOI
Mechanical Performance of Alkali-Treated Rattan Strips with Epoxy Coating for Sustainable Composite Applications
Kalatharan, Sujentheran Nair
; Imran, Al Ichlas
; Irawan, Agustinus Purna
; Siregar, Januar Parlaungan
; Cionita, Tezara
; Fitriyana, Deni Fajar
; Anis, Samsudin
; Dewi, Rozanna
; Setyoadi, Yuris
; Wisnu Prayogo
Advance Sustainable Science, Engineering and Technology (ASSET)
Vol 7
, No 3
(2025)
The use of natural materials like rattan in eco-friendly composites is gaining attention in materials engineering. However, its hydrophilic nature and interaction with other materials can affect mechanical strength. This study investigates how variations in rattan size and alkali treatment influence the tensile properties of single rattan strips through an epoxy dipping process. Rattan was prepared with varying lengths (5–15 cm), widths (3–8 mm), and a consistent thickness (0.5 mm). Alkali treat...
Google Scholar
DOI
1 Sitasi