📅 24 July 2026
DOI: 10.26877/asset.v8i3.2516
Numerical Modeling of Stress Ratios in Single-Lap Adhesive Joints with Geometrical Modifications
Advance Sustainable Science, Engineering and Technology (ASSET)
Universitas Persatuan Guru Republik Indonesia Semarang
📄 Abstract
This study aims to analyze the effect of variations in aluminum strip geometry and Araldite adhesive on the mechanical strength of single lap joints. A two-dimensional numerical model was developed in Abaqus/Standard using cohesive zone elements, the Benzeggagh-Kenane (B-K) model, and a quadratic stress criterion to validate the experimental results. The results show that the developed model is capable of accurately describing the stress distribution and the effect of secondary bending moments through the ratio of normal stress to shear stress. The application of chamfer geometry to the adhesive area proved to be effective in reducing secondary bending moments and increasing joint resistance. A comparison between the experimental and numerical simulation results showed a deviation of less than 15.5%, confirming the validity of this model. This study highlights the importance of geometric optimization in improving the mechanical strength and reliability of adhesive joints.
🔖 Keywords
#Aluminum-epoxy composite; Benzeggagh–Kenane model; cohesive zone elements; stress ratio; numerical modeling
ℹ️ Informasi Publikasi
Tanggal Publikasi
24 July 2026
Volume / Nomor / Tahun
Tahun 2026
📝 HOW TO CITE
Kurnia, Asep; Setya Putra, Ichsan; Syamsudin, Hendri ; Giri Suada, Muhamad ; Demas Priambudi, Oktavianus , "Numerical Modeling of Stress Ratios in Single-Lap Adhesive Joints with Geometrical Modifications," Advance Sustainable Science, Engineering and Technology (ASSET), Jul. 2026.
ACM
ACS
APA
ABNT
Chicago
Harvard
IEEE
MLA
Turabian
Vancouver
Download Citation
0
Sitasi
Cek Google Scholar