📅 31 March 2026
DOI: 10.26877/asset.v8i2.2760
Cam Simulation and Dimensional Verification of CNC-Machined Orthopaedic Femoral Components: Toolpath Optimization and 3D-Scan Metrology
Advance Sustainable Science, Engineering and Technology (ASSET)
Universitas Persatuan Guru Republik Indonesia Semarang
📄 Abstract
This study investigates the optimization of manufacturing femoral components for Total Knee Replacement (TKR) using Computer-Aided Manufacturing (CAM) simulation and 5-axis CNC milling, followed by dimensional verification based on 3D scanning. The machining process was simulated in Autodesk PowerMill to generate collision-free toolpaths for AISI 316L stainless steel. Dimensional verification was conducted by comparing the 3D-scanned physical model (using Creality CR-Scan Ferret Pro) with the original CAD model in Geomagic Control X. The metrological analysis showed a Root Mean Square (RMS) deviation of 0.5317 mm and an average positive deviation of 0.2572 mm. Spatial deviation analysis revealed significant dimensional variations, with a maximum deviation of +2.5761 mm and a minimum deviation of -2.5713 mm. Specifically, in critical functional regions, the medial and lateral condyles exhibited deviations ranging from -0.4683 mm to 0.232 mm, while the patellar groove showed a deviation of 0.1989 mm. Although the machining strategy successfully produced the complex implant geometry, the tolerance distribution data indicated that only 17.22% of the surface fell within the strictly specified tolerances, highlighting the need for further optimization of cutting parameters and fixturing strategies to minimize surface roughness and dimensional inaccuracies.
🔖 Keywords
#CAM simulation; 5-axis CNC; total knee replacement (TKR); 3D scanning; RMS deviation; dimensional metrology
ℹ️ Informasi Publikasi
Tanggal Publikasi
31 March 2026
Volume / Nomor / Tahun
Tahun 2026
📝 HOW TO CITE
Setyoadi, Yuris; Rifky Ismail; Bayuseno, Athanasius Priharyoto ; I Nyoman Jujur; Novriansyah, Robin ; Darmanto; Prawibowo, Hartanto ; Anggoro, Paulus Wisnu, "Cam Simulation and Dimensional Verification of CNC-Machined Orthopaedic Femoral Components: Toolpath Optimization and 3D-Scan Metrology," Advance Sustainable Science, Engineering and Technology (ASSET), Mar. 2026.
ACM
ACS
APA
ABNT
Chicago
Harvard
IEEE
MLA
Turabian
Vancouver
Download Citation
0
Sitasi
Cek Google Scholar