📅 11 June 2024
DOI: 10.26877/asset.v6i3.579
Waste Analysis in The Production Process Urea Fertilizer Using The Lean Six Sigma Method and Recommendations for Improving Failure Mode Effect Analysis (FMEA) at PT. Damai Sejahtera
Advance Sustainable Science, Engineering and Technology
Universitas Persatuan Guru Republik Indonesia Semarang
📄 Abstract
Agriculture plays an important role in the Indonesian economy, fertilizer is an important element in the development of the agricultural sector, especially urea fertilizer. PT. Damai Sejahtera, as one of the largest fertilizer producers in Indonesia, experienced waste in the urea fertilizer production process. In this study, lean six sigma was utilized. Using a lean approach, a reduction in non-value-added activities formed by the nine types of waste of 1360 to 1276 or 6.17% was achieved. However, using six sigma, it was found that the production process was not satisfactory as it resulted in many product defects with 36,331 DPMO and a sigma level of 3.32. Improvement suggestions to increase the sigma value were obtained through FMEA. Through this research, Process Cycle Efficiency was obtained from 74.85% to 80.35%.
🔖 Keywords
#Lean Sig Sigma; FMEA; Defect; urea fertilizer production
ℹ️ Informasi Publikasi
Tanggal Publikasi
11 June 2024
Volume / Nomor / Tahun
Volume 6, Nomor 3, Tahun 2024
📝 HOW TO CITE
Arier, Tivani Nava; Rochmoeljati, Rochmoeljati; Nugraha, Isna, "Waste Analysis in The Production Process Urea Fertilizer Using The Lean Six Sigma Method and Recommendations for Improving Failure Mode Effect Analysis (FMEA) at PT. Damai Sejahtera," Advance Sustainable Science, Engineering and Technology, vol. 6, no. 3, Jun. 2024.
ACM
ACS
APA
ABNT
Chicago
Harvard
IEEE
MLA
Turabian
Vancouver
Download Citation
3
Sitasi
Cek Google Scholar
📚 References & Citations
Artikel ini telah dikutip oleh 3 publikasi lainnya.